Perforated sheets can be utilized to advantage in numerous circumstances, e.g noise and weight reduction, air control, filtration or as a decorative finish. The shifted qualities advertised by perforated sheets make them perfect for sorting, screening, facades, ceilings, lights, shelves, shielding, stairs and numerous other applications, far as well numerous to say!

Thin perforated plates.

Railways, public works equipment and agricultural machinery: interior fitouts, air vents, running boards, footstools

Environment: sorting, waste crushing, water treatment, acoustics

Energy and electrical: Solar panel holders, racks, lighting, sound, heating

Equipment and industrial processes: wood industry, paper, foundry, chemical / petrochemical, food industry

Building industry: railings, suspended ceilings, partitions walls, floors, protection, closings.

Thicker perforated plates.

Building industry: suspended ceilings, partitions walls, floors

Equipment and industrial processes: food industry (trommel screens, filter press…)

Environment: waste crushing (wood industry, pneumatics…), washer plate, sorting

Railways, public works equipment and agricultural machinery: interior trim, air vents, running boards, footstools

Typical Application Of SS Perforated Sheet.

Flooring for buses, trucks, rail coaches

Floors for loading bays, kick plates, stair treads and catwalks

Corner guard for walls (interior decoration)

Door kicking plate

Stair treads

Can be used as decoration in modern cars – floors

Tread decking

Floors for elevators

Commercial use – shopping centres with high foot fall

 

Check special price for below Stainless steel perforated sheet sizes::

• AISI 304 perforated sheet with sheet size 1000 × 2000 mm and thickness 1 mm.
• Perforated plate, SS316L, 4′ × 8′ × 8 mm, hole diameter: 10 mm (holes in staggered row), pitch: 15 mm, thickness: 8 mm.
• SS sheet with 1/4″ square holes on 1″ straight center.
• 12″ × 12″of 316L perforated plate, 16 gauge, 0.094″ holes staggered on 0.156″ centers (47 holes/sq. in, 33% open area).
• Perforated plate SS304, size 3242 × 728, thickness 1.25 mm, mat test cert as per din 50049 2.2.
• Perforated sheet, thickness 0.075 in, hole diameter 4.5 mm, pitch 1.5 mm, material 416 SS, sheet size 4 ft × 4 ft.
• Stainless steel perforated sheet: 2.5 m × 6 m × 1.6 mm thickness and 6.35 mm open holes.
• Perforated stainless steel sheet 304 mill finish, sheet size: 2000 mm × 800 mm × 2 mm thick, hole size: 10 mm, hole distance: 10 mm.
• 304 SS perforated sheet with round hole, sheet size: 4′ × 4′, hole diameter: 3/8″.
• Stainless steel perforated sheet metal with round hole, sheet size: 288″ length × 40″ width.
• 304 stainless steel slotted perforated metal panel, thickness: 7 gauge, sheet size: 48″ × 96″.
• SS304 perforated sheets 11 gauge, sheet size: 48″ × 120″, hole size: 1/4″ staggered holes, open area: 40%.
• Stainless steel perforated slotted sheet, aperture: 5 mm, thickness: 1.0 mm, sheet size: 4′ × 8′.
• 304 perforated stainless steel, 24 gauge, hole size: 0.045″, straight line, hole distance: 0.066″, sheet size: 36″ × 96″.
• 16 gauge stainless steel perforated sheet metal, hole size: 0.5 mm, stainless steel grade: 316 grade or 304 grade.
• Perforated sheet, thickness 0.078 in, hole diameter 4.5 mm, pitch 1.5 mm, material 416 SS, sheet size 4 ft × 4 ft.
• Perforated steel mill finish, 1/8″ holes on 3/16″ staggered centers with a 1 5/8″ margin on all 4 sides, sheet size: 48″w × 64″ h, 36″ w × 88″ h.
• 304 stainless steel 2B or satin finished, sheet size: 2000 × 1000, thickness: 2 mm, hole size: 3 mm, hole distance: 15 mm, hole type: staggered.
• Stainless steel perforated sheet, 201 grade, sheet size: 4 ‘ × 8’.
• SS316 perforated sheet for personal protection, 22 gauge, 5 mm perforation and 10 mm pitch, sheet size: 12″ × 10″.
• Perforated stainless steel, sheet size: 24″ × 36″, 1/4″ diameter holes, 45 degree staggered holes.
• Square hole perforated sheet to use as a strainer for a seawater pump. Material: 316 SS. Thickness: 14 – 18 gauge. Pitch: 1/2″. Opening: 3/8″ × 3/8″.
• Perforated stainless sheet, sheet size: 36″ × 96″, wire diameter: 20 gauge, hole size: 1/16″, hole type: staggered, open area: 40%.
• 304 SS perforated sheet, 24 gauge, 0.188″ diameter holes on 0.35″ staggered centers with a 0.75″ margin on sides and ends, sheet size: 30″ × 150.75″.
• AISI 316L cold-rolled perforated sheets, mechanically straightened, slightly greased, small unperforated rim at all sides, sheet thickness: 1.2 mm, round hole
• SS304 round perforated sheet, 0.375″ thickness, hole diameter: 0.375″, hole center: 0.5625″, hole type: staggered, open area: 40%, sheet size: 60″ × 96″.
• 304 SS perforated sheet, sheet size: 48″ × 48″, hole size: 0.04″, open area: 22.6%.
• Perforated stainless steel with 1/8″ thick, hole pattern should be 1/8″ holes on 3/16″ centers, staggered, sheet thickness: 8″ × 12″.
• 60 degree staggered in either 3/4″ hole or 3/16″ holes which can keep as much light coming in as possible but allow some privacy. Sheet size: 78 3/4″ × 22 1/4 ” for the sidelights, 65 7/8″ × 26″ for the door inserts.
• diameter: 10 mm, hole type: staggered, hole distance: 5 mm, open area: 33%, sheet size: 1000 × 500 mm, 1000 × 700 mm, 1000 × 750 mm.
• Stainless steel perforated sheet with round hole, hole size: 0.045″, hole type: staggered, sheet thickness: 18 or 20 gauge.
• 316 Stainless steel perforated sheet, 11 gauge, hole size: 1/16″, hole type: staggered pattern, sheet size: 4′ × 4′.
• 304L perforated sheet with round hole, 14 gauge, hole size: 5/8″, hole distance: 13/16″, hole type: 60 degrees with staggered type.
• 304 SS perforated sheet, 26 gauge, 0.026″ diameter holes on 0.066″ staggered centers, sheet size: 30″ × 150.75″.
• Stainless steel perforated sheets, hole diameter: 0.5 mm, pitch: 1.08 mm , 625 holes PSI, sheet size: 600 mm × 2200 mm × 0.3 mm thickness.

 

SS Perforated Sheet Available Finish

2B, 2D, HR, CR, BA (No. 8), Satin (Met with PVC Coated), No.1 Finish, No.4 Finish

 

Type	1mm/ 2mm perforated stainless steel metal mesh screen sheet
Thinckness	0.3-15mm
Widthness	1000mm~ 2000mm or customized
Length	1000mm~ 6000mm or customized
High Demand SS Perforated Sheet Thickness	1, 1.25, 1.6, 2, 8 mm
Brand name	TISCO, JISCO, BAOSTEEL, POSCO, LIANZHONG, ETC
Standard	JIS, AISI, ASTM, GB, DIN, EN
Material	201/201/304/ 304L/ 316/316ti/ 316L/ 321/309S/ 310S/ 904L stainless steel perforated sheet
Surface	2B, BA, HL, Brush, NO.1, NO.4, 8K, SB, etc
Hole Pattern	Round Hole Perforated Sheet Square Hole Perforated Sheet Slot Hole Perforated Sheet Decorative Perforated Sheet Embossed Sheet
Other Perforation Material	Perforated Steel Sheet Perforated Stainless Steel Sheet Perforated Aluminum Sheet Perforated Copper Sheet
Perforated Sheet Application	Etched Plates Perforated Metal Noise Barrier Perforated Filter Perforated Tube Perforated Sunshade Panels Perforated Kinetic Facade Anti-Skid Stair Steps
Certificate	We accept the third inspections such as SGS-BV etc.
Standard sheet sizes	1000mm*2000mm, 1250mm*2500mm, 1219mm*2438mm, 1500mm*3000mm We can produce other standard as customized
Certification	BV, SGS , IQI, TUV.

Surface Finish	Thickness (mm)
No. 1	3.0mm ~50.0mm
2B	0.25mm ~6mm
No. BA (Bright Annealed)	0.25mm ~3.0mm
No. 4	0.4mm ~3.0mm
No. 8	0.5mm ~2.0mm
HL(Hair Line)	0.4mm ~3.0mm